Why do auto winding machines have more functions than Ordinary winding machine?
The transformer manufacturing process determines the frequent start-up of equipment and certain torque requirements. In general, the parameters that you need to set for a transformer winding machine are:
The slow function setting is also a commonly used parameter. It is primarily used to control the device to start and stop at low speed and to play the soft start and stop buffer functions. With the correct settings, the operator can adapt when starting the winding. If you stop the device in the process of pulling the machine, you can stop the buffer more accurately.
The number of turns setting is the number of turns that the device needs to operate according to the manufacturing process, and is divided into the total number of turns and the number of turns corresponding to each step sequence. The setting should pay attention to the total. The number of turns equal to the total number of turns in each step sequence.
Driving speed is used to control the speed of the equipment in operation. The speed setting should be determined according to the manufacturing process and the actual working conditions of the winding. If it is too fast or too slow, it will not form. The vibration and noise of the equipment will increase, and operating at low speed will greatly affect the production capacity and efficiency of the equipment, and will also affect the torque. The output of the equipment spindle.
Due to advances in science and technology, there are generally no strict requirements for the usage environment of self-winding machines, but since self-winding machines contain many electronic components, they are afraid of direct sunlight and humidity. Please note that the winding machine may operate abnormally due to corrosion or deterioration of electronic parts or short circuit between parts due to dust, vibration, etc.
It is important for users to consider the protection of the surrounding environment. For example, on rainy days, you need to be careful not to bring your umbrella to the production site and keep the production site clean. The step-by-step sequence function is used to control the operation sequence of the device. This is usually determined according to the manufacturing process. Coil formation and winding is not only the winding of enamel wire, but also many other steps such as: By correctly setting the step-by-step sequence function for wrapping paper, wrapping insulating cloth, etc., Therefore, the correct setting of the step sequence function will effectively play the efficiency of the equipment.
