Installation and use environment of automatic winding machine
1 winding machine workbench and foundation should have any strength and stress, so as not to cause a large vibration when winding machine quickly moved, to determine the vibration of winding machine does not harm the original accuracy and life, not vibration and harm the coil quality, close to the device and building not due to the harm of the winding machine defects.
2 the worktable and foundation of the winding machine should have reliability and use performance, waterproof and non-slip and erosion of harmful objects, and determine not to cause deformation or partial subsidence. When the winding machine is placed in an environment that is likely to be exposed to chemical liquids, oil or corrosion, the foundation should add a protective layer. For example, on the surface of the foundation coated with anti-acid, anti-oil cement sand, and drainage, collection of liquid groove.
3 the foundation of large winding machine should be preloaded in machine assembly. The quality of pre-compression is 1.25 times the sum of the total quality of the winding machine and the larger quality of the workpiece of the customer product. The preload can be steel, sand and small stones. The preloaded material should be evenly pressed on the foundation to ensure that the foundation sinks evenly. The preloading work should be carried out until the foundation does not sink again.
4 winding machine workbench and foundation should be with the base of the model winding machine, and can determine the winding machine assembled on the stability of the general, determine the ring has a general grounding equipment, determine the ring can not be large interference source.
The center point of the winding machine and the workbench and the total center point of the foundation and the centripetal force of the foundation bottom are in the same vertical line.